rap-2 logo

Capabilities & COST

RAP2 Capabilities & Cost Guide | Opus IVS
Download PDF
IMPORTANT: When using RAP2, completely disconnect any aftermarket accessories including radios, alarms, sound systems, starters, etc. from the vehicle communication bus; failure to do so may cause programming failures and void our service guarantee. This program does not support programming used or salvage modules for most makes. Plug in RAP2 kit and turn tablet on 30 minutes prior to session to ensure software updates are completed.
RAP Programming

BMW

Pricing

Programming $199.00 / ea
Cal Check $50.00 / ea
* Service to ID current software level and update availability
** Cal Check may be applied to Programming fee for same module
  • 2002 and newer: All Emission module (ECM/TCM/PCM) updating & replacement
  • 2002 and newer: All Body and Chassis module updating & replacement (Exceptions Below)
  • J2534 module programming, updating, coding
  • Module calibration check

BMW PTA Special Cable Needs by Chassis

BMW Series 7-8 Jumper Adapter Required
3er E36, E46
5er E34, E39
7er E32, E38
X E83-X3, E53-X5
Mini R50, R52 & R53
Z E36-Z3, E85-Z4, E86-Z4 & E52-Z8

** DoIP Cable required for F25 Chassis (only)

DoIP Module may require the following cable:
Snap-on P/N: EAX0068L42A DoIP Kit
Opus P/N: BMW-CBL-Kit

Chassis-Specific Exceptions

Chassis Notes
F39 No module programming or coding
G05, G07, G14, G15, G20 Can code some (call to confirm)
All All infotainment ECUs (SAT NAV / RADIO / AMPLIFIER / CD / DVD) Coding Only (Replacement Needs Coding). Module updating not possible. Replacement possible with stipulations.
***NOTE: After a hard drive-base head unit (CIC, NBT, etc.) replacement, an enabling code for the navigation system is needed along with the navigation software and we cannot provide it. DVD-Based Head units (CCC) have a voice-enabling code imported after replacement of the head unit, we cannot provide it.
All All Bluetooth/Telephone ECUs. Coding Only (Replacement Needs Coding. No module updating.)
All CAS (Car Access System) Coding Only (Replacement Needs Coding. No module updating.)
All JBE (Junction Box Electronics) Coding Only (Replacement Needs Coding. No module updating.)
All All Engine ECUs (MEV1722/MEVD1726). Updating only. No replacements
E46, E83 MS43, MS45.1 Programming risk per TSB SIB 12 24 06.
*** NOTE: EGS and DSC should be disconnected before programming is performed.
E6x Non Motorsport Cars Sequential Manual Gearbox Module. No module updating. No Module Coding. No replacements.
E83, E85, E86, E9x MSV80 DME (Digital Motor Electronics) No updating. (Replacement requires programming)
All Instrument Cluster Coding only (Replacement requires only Coding).
** Some G Chassis require cluster programming.
All FEM (Front Electronic Module) Coding only (no programming).
All BDC (Body Domin Controller) No programming or coding
All Hybrid or Electric No Support
  • Some vehicles will need to be scanned using the OEM software to determine whether an update is available or not. This process may take 15 - 20 minutes prior to the programming service.
  • Some vehicles may take up to four (4) hours to complete programming.

Module/System Examples:

Digital Motor Electronics Junction Box Electronics Footwell Module Instrument Cluster Module Car Access System Sequential Manual Gearbox Front Electronic Module
RAP Programming

Chrysler / Jeep / Dodge / RAM / Plymouth

Pricing

Programming $218.00 / ea
FCA Prog Charge included
Cal Check $80.00 / ea
* Service to ID current software level and update availability
** Cal Check may be applied to Programming fee for same module
Hard-wired internet connection is REQUIRED.
If you need an Ethernet cable and a USB to Ethernet adapter, have your Serial Number available and contact Opus IVS @ 844-REFLASH (844) 733-5274
  • All Models: Replacement modules must be new or properly re-manufactured.
  • 1996 - 2003: ECM/PCM/TCM updating only. No module replacements
  • 2008 and newer: All module updates and replacements
  • Pacifica / Viper
    • 1996 - 2006: ECM/PCM/TCM updating only. No module replacements
    • 2007 and newer: All module updates and replacements.
  • Caravan / Voyager / Town & Country / Liberty / PT Cruiser
    • 1996 - 2007: ECM/PCM/TCM updating only. No module replacements
    • 2007 and newer: All module updates and replacements.
  • 2500 / 3500 / 4500 / 5500
    • 1996 - 2007: ECM/PCM/TCM updating only. No module replacements
    • No support for 5.9 Cummins equipped vehicles
  • Sprinter Van: See Mercedes
  • Crossfire: See Mercedes

Security-Related Notes

  • Stand-alone key programming is available for 2006 - 2013 MY vehicles.
  • Key programming for security module replacement for 2014 and newer will require NASTF credentials
  • 2 keys may be required for security related module programming.
  • Security Pin: Many 2014 vehicles will require a Chrysler (FCA) security PIN.
    • Security PINs can be obtained from a FCA Dealer (charges may apply)
    • Or we can obtain them for you ($30 charge).
NASTF LSID / VSP credentials may be required to perform security related services. If you do not have NASTF LSID / VSP credentials, you may use NASTF Air program. NASTF Air program will cost $45, payable to NASTF.

Module / System Examples:

Powertrain Control Module Transmission Control Module Occupant Restraint Control Module Wireless Ignition Node Wireless Control Module Radio Frequency Hub
RAP Programming

Ford Motor Company

Pricing

Programming $174.00 / ea
Cal Check $75.00 / ea
* Service to ID current software level and update availability
** Cal Check may be applied to Programming fee for same module
  • 1996 and newer module updating & replacement programming
  • Vehicles 2003 and older: The old module must be installed and communicating at start of appointment
  • Diesel FICM module replacement and programming
  • No support for Low Cab Forward (LCF) vehicles.
  • Used Modules: We can attempt to program used modules. The module programming fee will apply, whether or not the programming attempt is successful.
  • Hybrid Transmission module replacement may have special procedures, please call
  • Cannot remotely program vehicle radios

Security-Related Notes

  • Stand-alone key programming service is available for 2013 and earlier vehicles
    • No "stand alone" key programming is available for 2014 and newer
  • Key programming for security module replacement for 2014 and newer will require NASTF credentials
    • PATS related modules starting in MY 2013 require coded security access instead of the ten (10) minute timed security access.
  • 2 keys may be required for security related module programming.
NASTF LSID / VSP credentials may be required to perform security related services. If you do not have NASTF LSID / VSP credentials, you may use NASTF Air program. NASTF Air program will cost $45, payable to NASTF.

Module/System Examples:

Powertrain Control Module Transmission Control Module Fuel Injection Control Module Restraint Control Module Instrument Cluster Passive Anti Theft System
PTA Programming

General Motors

Pricing

Programming $174.00 / ea
Cal Check $75.00 / ea
* Service to ID current software level and update availability
** Cal Check may be applied to Programming fee for same module
  • 2005 and newer (some exceptions) updating & replacement
  • 2005 and newer updating & security functions that are supported by the GM Service Programming System
  • Global A & B platform vehicles do not support used or salvage modules
  • Used Modules: We can attempt to program used modules. The module programming fee will apply, whether or not the programming attempt is successful.

J2534 module programming, key programming and associated configuration, setup and security functions.

  • Note 1: Cannot remotely program radios
  • Note 2: Used Modules - the module programming fee will apply, whether or not the programming attempt is successful.
  • Module configuration, setup, and security functions for all modules supported by GM Tech2Win
  • Module configuration, setup, and security functions for all modules supported by GM GDS2

Security-Related Notes

  • Stand along key programming for security module replacement for 2001 - 2024 vehicles
  • 2 keys may be required for security related module programming.
NASTF LSID / VSP credentials may be required to perform security related services. If you do not have NASTF LSID / VSP credentials, you may use NASTF Air program. NASTF Air program will cost $45, payable to NASTF.

Module/System Examples:

Powertrain Control Module Body Control Module Human Machine Interface Module Transmission Control Module Trailer Brake Control Module Theft Deterrent Module
RAP Programming

Honda / Acura

Pricing

Programming $194.00 / ea
(includes "programming fee")
Cal Check $95.00 / ea
* Service to ID current software level and update availability
** Cal Check may be applied to Programming fee for same module
  • 2006 and prior: Please see table below
  • 2007 and newer: Existing module updates
  • 2007 and newer: Module replacement service for non-security TCM, ABS & PSCM modules

An ✓ in the table below denotes the module is reprogrammable if an update is available:

Honda Models
Model 2001 2002 2003 2004 2005 2006 2007 and Newer
Accord ✓ ✓ ✓ ✓ All Modules
Accord Hybrid ✓ ✓
Civic ✓ ✓ ✓ ✓ ✓ ✓
Civic Hybrid ✓ ✓ ✓ ✓
CR-V ✓ ✓ ✓ ✓ ✓
Element ✓ ✓ ✓ ✓
Fit
Insight ✓ ✓ ✓ ✓ ✓ ✓
Odyssey ✓ ✓
Pilot ✓ ✓
Ridgeline
S2000 ✓
Acura Models
Model 2001 2002 2003 2004 2005 2006 2007 and Newer
MDX ✓ ✓ ✓ ✓ All Modules
RDX
RL ✓ ✓
RSX ✓ ✓ ✓ ✓ ✓
TL ✓ ✓ ✓
TSX ✓ ✓ ✓

Module/System Examples:

Programable Module Fuel Injection (PGM-FI) Automatic Transmission Supplemental Restraint System Anti-Lock Brake System
RAP Programming

Hyundai

Pricing

Programming $149.00 / ea
Cal Check $50.00 / ea
* Service to ID current software level and update availability
** Cal Check may be applied to Programming fee for same module
  • 2005 and Newer: ECM/TCM Updates Only
    • TCM: Call for availability
  • Module calibration check is also available.

Hyundai Models Supported by RAP

Model Year
Accent2005 - 2023
Azera2006-2017
Elantra2005 - 2026
Entourage2007-2009
Equus2011 - 2016
Kona2018 - 2026
Palisade2020 - 2026
Santa Cruz2005 - 2026
Santa Fe2005 - 2026
Sonata2005 - 2026
Tiburon2005 - 2008
Tuscon2006 - 2026
Veloster2012 - 2022
Venue2020 - 2026
Veracruz2007 - 2012
X3502005

Module/System Examples:

Powertrain Control Module Transmission Control Module (call for availablity)
RAP Programming

Kia

Pricing

Programming $149.00 / ea
Cal Check $50.00 / ea
* Service to ID current software level and update availability
** Cal Check may be applied to Programming fee for same module
  • 2005 and Newer: ECM/TCM Updates Only
    • TCM: Call for availability
  • Module calibration check is also available.
Model Year
Amanti2007 – 2009
Borrego2009
Cadenza2014 – 2021
Carnival2026
Forte2010 – 2024
Forte52014 – 2024
K9002015 – 2021
K42025 - 2026
K52021 - 2026
Niro2017 – 2023
Optima2007 – 2024
Rio2006 - 2023
Rondo2007 - 2010
Sedona2005 – 2012
2014 – 2024
Seltos2021 - 2026
Sorento2007 – 2026
Soul2010 – 2026
Spectra2005 – 2009
Sportage2007 – 2026
Stinger2018 - 2023
Telluride2020 -2025

Module/System Examples:

Transmission Control Module (call for availability) Powertrain Control Module
RAP Programming

Mazda Motor Corporation

Pricing

Programming $149.00 / ea
Cal Check $50.00 / ea
* Service to ID current software level and update availability
** Cal Check may be applied to Programming fee for same module
  • 1997- 2006: Call with Model, Year & Module
  • 2007 and newer module updating & replacement and associated configuration as supported by:
    • Mazda 124: For 2017 and earlier vehicles (emissions modules only)
    • MSDFSA 124: For 2018 and newer models Mazda3, Mazda6, MX5, CX-3, CX-5 & CX-9
    • MDARS2: For 2019+ Mazda3 and 2020+ CX-3
  • Module calibration check service is available
  • Key programming is available
  • Used Modules: We can attempt to program used modules. The module programming fee will apply, whether or not the programming attempt is successful.
  • Vehicles 2006 and older: The old module must be installed and communicating at start of appointment

Security-Related Note

  • 2 keys will be required for security related module programming.

Module/System Examples:

Powertrain Control Module Transmission Control Module Fuel Injection Control Module Restraint Control Module Instrument Cluster Passive Anti Theft System
RAP Programming

Nissan / Infiniti

Pricing

Programming $206.00 / ea
Cal Check $50.00 / ea
* Service to ID current software level and update availability
** Cal Check may be applied to Programming fee for same module
  • MY 2005 - Current: Car Engine and Transmission module updates and replacements
  • MY 2004 - Current: Truck Engine and Transmission module updates and replacements
  • MY 2018 - Current: All module programming, configuring & re-programming
    • Exceptions:
      • Direct Adapted Steering modules
      • Titan diesel power-train modules

Updated TCM Support

  • RE0F08B (JF009E) CVT1 module updating and replacement
  • RE0F10A (JF011E) CVT2 module updating and replacement
  • RE0F10B (JF011E) CVT2 (Turbo) module updating and replacement
  • RE0F09B (JF010E) CVT3 module updating and replacement
  • RE0F11A (JF015E) CVT7 module updating and replacement
  • RE0F10 (JF011) CVT8 module updating and replacement
    • CVT8 programming will require you to have the calibration on CD format
  • 2004 and newer powertrain (ECM TCM) module updating
  • 2005 and newer powertrain (ECM/TCM) module replacement
  • 2005 and newer rear-wheel drive (RWD) valve body programming
  • Nissan Valve Body/Transmission Programming
Notes:
  • Nissan Valve Body/Transmission Programming: Due to the time required for these services, scheduling this service must be done prior to 3:30pm EST.
  • Call to schedule earlier in the day to ensure same-day service!

Module/System Examples:

Engine Control Module Transmission Module ABS Module (Replacement) Airbag module PSCM
RAP Programming

Toyota / Lexus / Scion

Pricing

Programming $174.00 / ea
Cal Check $75.00 / ea
* Service to ID current software level and update availability
** Cal Check may be applied to Programming fee for same module
  • 2001 and newer
  • New module programming. Used and re-manufactured modules not permitted at this time
  • Existing module updates
  • J2534 module updating, programming & RWD valve body is available.
  • Module calibration check is also available.

Module/System Examples:

Engine Control Module Electronic Transmission Module Traction Control Module Main Body Control Module
RAP Programming

Volvo

Pricing

Programming Call for quote (varies by module)
Cal Check (varies by module)
* Service to ID current software level and update availability
  • 2004 and newer vehicle module programming
  • J2534 module programming, key programming and associated configuration, setup and security function service is available.
  • Programming vehicle module programming fee will apply, whether or not the programming attempt is successful.
  • Calibration files charged extra: Most Module & Key programing s/w is a separate charge.

The following Notes may require the use of the following adapters:

  • Note 1: If the module is an ICM/IHU then the part number #9513060 is needed
  • Note 2: SPA Platform Requires DOIP Cable/RAP/DriveCrash/CD4 Euro Cable for DrivePro. No Part USB drive needed.
  • Note 3: Non-SPA but is DOIP Requires DOIP Cable. No Part USB drive needed.
  • Note 4: Non-DOIP. Does Not require USB flash Do not need DOIP.

Note 1: Volvo P/N: 95133060

Capabilities by Year - Model - Module

Volvo Model Year Requirements
C302007Note 4
C302008 - 2013Note 1
C702004 - 2007None
C702008 - 2013Note 1
S402004 - 2007None
S402008 - 2011Note 1
S602005 - 2007None
S602008 - 2018Note 1
S602019 - 2022None
S60 R2007None
S802007None
S802008 - 2016Note 1
V402004None
V502005 - 2007None
V502008 - 2012Note 1
V702007None
V702008 - 2016Note 1
V70 R2007None
XC402016, 2020 - 2022None
XC402017 - 2019Note 3
XC40 Electric2021None
XC602008 - 2018Note 1
XC602019 - 2022None
XC702005 - 2007None
XC702008 - 2018Note 1
XC902005 - 2007None
XC902008 - 2014Note 1
XC902016 - 2022None

Module Types and their acronyms:

Actual Name Module
Audio ModuleAUD
Accessory USB UnitAUU
Brake Control ModuleBCM
Bluetooth Phone ModuleBPM
Climate Control ModuleCCM
Driver's Door ModuleDDM
Differential Control ModuleDEM
Driver's Information Module (cluster)DIM
Engine Control ModuleECM
Electrical Throttle ModuleETM
High Level Display FrontHLDF
Integrated Audio ModuleIAM
Infotainment Control ModuleICM/IHU
Multimedia ModuleMMM
Park Assistance ModulePAM
Park Brake ModulePBM
Passenger Door ModulePDM
Power Operated Tailgate ModulePOT
Power Steering Control ModulePSCM
Power Seat ModulePSM
Remote Digital Audio ReceiverRDAR
Steering Angle Sensor ModuleSAS
Steering Column LockSCL
Steering Wheel ModuleSWM
Starter Control ModuleSCU
Supplemental Restraint System ModuleSRS
Subwoofer ModuleSUB
Transmission Control ModuleTCM
Closing Velocity ModuleCVM
Headlamp Control ModuleHCM
Trailer ModuleTRM
Park Assistance CameraPAC
Keyless Vehicle ModuleKVM
Upper Electronic ModuleUEM
Forward Sensing ModuleFSM
Rear Electronic ModuleREM
Suspension ModuleSUM
RAP Programming

Volkswagen & Audi **NEW**

Pricing

Module Replacement Service $199.00
  • Module replacement service, generally for MY 2010.5 and newer
  • Most module installation requires "coding", not programming
  • We can code, but cannot perform software update

Service Requirements

  • Services will require an Ethernet connection to your router
  • Service is internet latency dependent
  • Used instrument cluster installation: No mileage correction
  • Diesel Vehicles: We cannot perform SCR lockout/Resets through the PTA Kit
  • VW Routan Vehicles: Are manufactured by FCA, please note this at appointment time.

Security Access

NASTF LSID / VSP credentials may be required to perform security related services. If you do not have NASTF LSID / VSP credentials, you may use NASTF Air program. NASTF Air program will cost $45, payable to NASTF.
  • Many modules are "Component Protected" requiring a NASTF Assisted Immobilizer reprogramming.
  • Reprogramming form needs to be submitted prior to programming service.

** Check with the VAG team for specific questions about which modules are Component Protected **

VW & Audi Component Protected Modules

Module Name Module Name (continued)
A/C Heating Electronics (08) Left Seat Belt Tensioner (8F)
Access/Start Authorization Module (05) Media Player Position 1 (0E)
Airbag Module (15) Media Player Position 2 (1E)
Auxiliary Heating (18) Media Player Position 3 (2E)
Central Comfort Module (46) Navigation (37)
Central Electric/Body Control Module (09) Night Vision (84)
Diagnostic Interface (19) Radio (56)
Display Control Head (07) Right Seat Belt Tensioner (90)
Distance Regulation (13) Seat Adjustment, Drivers Side (36)
Distance Regulation 2 (8B) Seat Adjustment, Passenger Side (06)
Front Assist Camera (A5) Seat Adjustment, Rear Drivers Side (48)
Information Electronics (5F) Seat Adjustment, Rear Passenger Side (5B)
Information Electronics 2 (7F) Sound System (47)
Instrument Cluster (17) (not used) TV Tuner (57)
Lane Change Assist (3C) Voice Control (67)

AUDI VEHICLES

Audi A3 (2010+) No Adblue Reset
Audi A4 (2010+)
Audi A5 (2010+)
Audi A6 (2009+) No Adblue Reset
Audi A7 (2013+)
Audi A8 (2011+) No Adblue Reset
Audi Q3 (2014+)
Audi Q5 (2009+) No Adblue Reset
Audi Q7 (2009+) No Tow Hitch Retrofit, No Parking Brake Basic Settings, No Adblue Reset
Audi Q8 (2019+) No Tow Hitch Retrofit
Audi R8 (2008+)
Audi TT (2010+)
Audi e-tron (2021+)
Audi Q4 e-tron (2022+)
Audi Q6 e-tron (2023 +)
Audi Q8 e-tron (2020+) No Tow Hitch Retrofits

VW Vehicles

Atlas (2018+)
Atlas Cross Sport (2020+)
Beetle (2012+) No Steering Racks
CC (2011+) No Electronic Steering Locks, No Steering Racks
EOS (2011+) No Steering Racks
Golf (2011+) No Steering Racks
ID.4 (2021+)
Jetta (2011+) No Steering Racks
Passat (2011+) No Electronic Steering Locks, No Steering Racks, No Adblue Reset
Taos (2020+)
Tiguan (2009+) No Steering Racks for 2009-2017
Touareg (2010+) No Adblue Reset, No Parking Brake Basic Settings, No Tow Hitch Retrofits