DRIVEPRO 2
ONE PLATFORM FOR OEM DIAGNOSTICS, PROGRAMMING AND EXPERT SUPPORT
Expand into European and EV vehicles, bring programming in-house, and give your technicians direct access to OE tools and live expert support — all from one dedicated platform. DrivePro® 2 is an all-in-one OEM-approved diagnostic platform that combines powerful J2534 hardware, an integrated PC environment, on-tool AI assistance and access to expert remote services.
WHAT IS DRIVEPRO 2?
DrivePro 2 is a dedicated professional programming and diagnostic support platform built for shops that want to expand vehicle coverage, reduce outsourcing, and empower technicians with OE-level tools and live expert guidance.
Unlike standalone J2534 devices, DrivePro 2 combines:
- Integrated OE software access (Farsight Mode)
- Autologic legacy European diagnostics
- AI-powered diagnostic guidance (AiDN)
- Live remote programming & diagnostic support
- A dedicated hardware platform built for shop-wide use
This is not just a device. It’s a centralized programming and support environment.
IS DRIVEPRO 2 RIGHT FOR YOUR SHOP?
DrivePro 2 is ideal if you:
Want to expand into European vehicles like BMW, Mercedes, Audi, VW, Land Rover
Are seeing more EV or Tesla vehicles in your bays
Turn away programming jobs due to coverage limitations
Want to bring outsourced programming revenue back in-house
Have B- or C-level technicians who need expert backup
Want a centralized OE programming environment instead of juggling laptops
If you only need a J2534 programming device to support your existing scan tool, Cardaq Pro may be a better fit.
Watch Opus IVS Master Tech Brandon Mathews tour the DrivePro 2 tool in a recorded webinar:
CORE FEATURES
SCAN TOOL HUB FOR COMPLEX REPAIRS
When your everyday scan tool handles most work, DrivePro 2 is what you use for the tough stuff.
- Advanced module programming
- Complex coding
- European diagnostics that aftermarket tools struggle with EV and Tesla-related work
- Jobs you’d normally outsource
- Jobs you don’t want to guess on
This is the setup you roll to when the risk is higher and the job matters.
FARSIGHT MODE — OE SOFTWARE IN ONE PLACE
Stop juggling laptops and manufacturer logins.
DrivePro 2 gives you a clean, controlled way to run OEM software and programming workflows inside your shop.
- Launch OEM applications from one device
- Keep credentials organized
- Reduce setup headaches
- Keep advanced programming structured
Less scrambling. More consistency.
AIDN — BUILT-IN GUIDANCE WHEN YOU’RE STUCK
AiDN provides AI‑powered diagnostic tips and suggestions directly on the tool—serving as the first step before live support.
Before you pick up the phone, AiDN helps point you in the right direction.
- Faster next-step suggestions
- Reduced downtime
- Less trial-and-error
- Built-in learning for developing techs
LIVE EXPERT BACKUP (WHEN YOU NEED IT)
Some jobs just need another set of eyes.
With DrivePro 2 and an IVS 360 membership, you can connect to OE-trained experts who can:
- Perform remote programming
- Assist with tough diagnostics
- Help with European workflows
- Support high-risk or edge cases
You don’t need a master tech for every brand — you have backup when you need it.
EURO & EV CAPABILITY
As more European and electric vehicles enter your bays, coverage matters.
DrivePro 2 supports:
- Legacy European diagnostics
- Dealer-level programming workflows
- EV and Tesla-related service scenarios
- Advanced brand-specific repair procedures
RESOURCES & TRAINING
Compare Tools
Compare DrivePro 2 here →
Watch Webinars
Explore trainings here →
What is a Companion Tool?
Read the guide here →
Purchase options
Have questions about compatibility, setup, or whether DrivePro 2 is the right fit for your shop? Request a product demo in the form below.
Our specialists can walk through your needs, show you the platform and help you make the right decision before you buy.